All other UniFi devices use the default credentials of 'ubnt' for the username and 'ubnt' for the password. Once the device is adopted into the UniFi Controller, the username and password get changed to the shared device credentials stored in the UniFi Network Application.
If you want fast and reliable UniFi hosting, check out HostiFi with fast support, regular backups, managed updates and prices from just $9 per month.
If you are interested in learning more about our hosting plans, create an account and get started today.
For the UXG Pro, the username is 'root' by default and then once device is adopted into the UniFi Controller, the username and password get changed to the shared device credentials stored in the UniFi Network Application.
Logging into the UXG Pro via SSH for the first time
macOS
On macOS, open up the Terminal application
Type in ssh root@192.168.1.1 then hit return, if your device happens to be on a different IP address, use the below format.
ssh <username>@<ip-address>
Next, click the return key and the UXG Pro will ask for a password. The password is 'ubnt'
Username: root
Password: ubnt
Once logged in you'll be greeted with the welcome message. From there you can upgrade the firmware via SSH or adopt it a HostiFi controller.
Windows
Open up PuTTY, as Windows does not have a built in SSH client.
See this guide on how to install PuTTY on Windows
Type in 192.168.1.1 or the IP address for your UXG Pro
Next click 'Open'
After that, PuTTY will display a security message about the rsa2 fingerprint. On this window, press Accept to allow the connection
Next the UXG Pro will ask for a username, which is 'root'
Username: root
Password: ubnt
The UXG Pro will then ask for a password, which is 'ubnt'
Once logged in you'll be greeted with the welcome message. From there you can upgrade the firmware via SSH or adopt it a HostiFi controller.
Logging into the UXG Pro via SSH once it has been adopted
The process for logging into the UXG Pro once it has been adopted it very similar, the username and password are now determined by the UniFi Controller. Everything else mentioned above is the same.
Finding the username and password in UniFi
Once a device is adopted into the UniFi Controller, they take on the set SSH credentials from the controller.
First, log into your UniFi Controller and go to the 'Settings' section
Under settings, go to the 'System' tab
Scroll down to find a section called 'Network Device SSH Authentication', where the SSH credentials can be found. Use these to log into your UXG Pro using the guide above.
HostiFi
HostiFi provides hosting for both Ubiquiti and TP-Link software-defined-networking (SDN) applications, with servers for UniFi, UISP and Omada. We also offer professional networking consulting, with HostiFi Pro.
If you run into any issues, send an email to support@hostifi.com or contact us via live chat.